Pressure Washing
Blast away years of dirt, oil, and grime from concrete, pavers, wood, and stone. Professional-grade equipment with trained operators — safe for every surface.
About the service
What is pressure washing?
Pressure washing — sometimes called power washing — uses a high-velocity stream of water, often combined with specialized detergents, to remove built-up dirt, mildew, algae, mold, oil stains, gum, rust, and grime from hard exterior surfaces. It's the single fastest way to take a tired, weathered surface and make it look brand new again.
In Florida's hot, humid climate, organic growth like mildew and algae can take hold on concrete, pavers, and wood in just a few months. Left alone, it doesn't just look bad — it makes walkways slippery, traps moisture against surfaces, and slowly eats away at sealants and finishes. Routine pressure washing keeps your property safe, attractive, and protected.
At BlueJet Wash, we don't just point a wand and pull the trigger. We match the right pressure (PSI), water temperature, nozzle tip, and detergent to each specific surface — so concrete gets a deep, even clean while wood decks and painted surfaces are treated with the gentler care they need.
Why it matters
More than just a clean look
Boost curb appeal
A clean exterior can add thousands to your home's value and is one of the cheapest ways to refresh your property.
Protect your investment
Removing mildew, algae, and grime prevents premature wear on concrete, wood, and sealants.
Safer surfaces
Algae and mildew make walkways and pool decks dangerously slick. A clean surface is a safer one.
Healthier outdoors
Eliminating mold and pollen buildup means a cleaner, more breathable space for family and pets.
What we clean
Surfaces we restore
Our pressure washing service tackles the toughest buildup on the hardest exterior surfaces around your property. We match pressure and technique to each material.
- Concrete driveways & sidewalks
- Brick pavers & patios
- Pool decks & copings
- Wood & composite decks
- Fences & retaining walls
- Trash cans & dumpsters
Professional-grade equipment
We use professional hot- and cold-water pressure washers up to 4,000 PSI with adjustable settings and surface cleaners. That means faster cleaning, more even results, and no streaks or zebra lines on your concrete.
Up to 4,000 PSI
Adjustable power
Surface cleaners
Streak-free concrete
Hot water option
Cuts grease & oil
How it works
Powerful cleaning, careful execution
Assess & pretreat
We inspect the surface, apply degreaser or detergent where needed, and protect delicate landscaping.
Pressure clean
Using the right tip, pressure, and temperature for your surface — we strip away dirt, algae, and stains.
Rinse & restore
Final rinse, post-treatment for mildew prevention, and a walkthrough to confirm you're thrilled with the result.
Frequently asked
Pressure washing questions, answered
How often should I have my driveway pressure washed?
For most Tampa homes, every 12–18 months keeps concrete looking great. Pool decks and high-traffic walkways often benefit from yearly cleaning to prevent slick algae buildup.
Will pressure washing damage my concrete or pavers?
Not when it's done right. We use surface cleaners and the correct PSI for each material — far gentler than running a turbo nozzle directly on the surface, which can etch lines into concrete.
Do you use chemicals? Are they safe?
Yes — we use biodegradable detergents tailored to the job. We pre-wet landscaping and rinse thoroughly to keep plants, pets, and people safe.
Do I need to be home during the service?
Not necessarily. As long as we have access to a water spigot and the area to be cleaned, you can leave us to it. We'll send before-and-after photos when we're done.
How long does a typical job take?
A standard driveway takes 1–2 hours. A full exterior package (driveway, sidewalks, patio, and pool deck) typically runs a half day. We'll give you an exact window with your quote.
What's the difference between pressure washing and soft washing?
Pressure washing uses high water pressure for tough surfaces like concrete. Soft washing uses low pressure plus cleaning solutions for delicate surfaces like siding, roofs, and screens.
Surfaces we clean
Pick your project
Driveway Cleaning
Lift oil, tire marks and years of grime.
Your driveway is the first thing guests and buyers see. We restore concrete, pavers and stamped surfaces to a like-new finish.
Learn morePatio & Lanai Cleaning
Bring your outdoor living space back to life.
Pavers, stamped concrete, screened lanais and travertine patios get a careful, surface-specific clean — no etching, no damaged grout.
Learn morePool Deck Cleaning
Bright, slip-resistant, ready for swim season.
Pool decks are constantly wet, which makes them a magnet for algae, mildew and black streaks. We clean them safely without harming surrounding turf or your pool chemistry.
Learn moreFence Cleaning
Vinyl, wood and aluminum — restored without damage.
Fences pick up green algae on the shaded side and gray weathering everywhere else. We bring them back to their original color safely.
Learn moreFAQ
Frequently asked questions
Most residential driveways and patios run $150–$350 depending on size and condition. We always provide a free, no-obligation quote within 24 hours.
Bring your driveway back to life
Free quotes within 24 hours. Serving Tampa, FL & surrounding areas.
Book your free quote